Product Description
Factory Directly Provide O ring chain motorcycle drive chain for dirt bike
We also supply motorcycle chain 25, 25H, 06B, 415, 415H, 420, 420H, 428, 428H, 520, 520H, 525, 525H, 530, 530H, 630, O ring and X ring chain and so on, our chains are both excellent in quality and reasonable in price
1.Good quality and reasonable price
2.Has taken measure to better antirust
3.Long-life duration and high strength
4.Pre-stretching and running for each motor chain before delivery
5.Riveting: Two sides riveting or 4 sides riveting
6.All parts are heat treatment (quenching and tempering) and controlled in a reasonable tolerance range
7.We can also produce as your sample or drawing
8.Packing: According to your demand to design
Specifications are as follows:
|
Chain No. |
Pitch |
Roller diameter |
Width between inner plates |
Pin diameter |
Pin length |
Inner plate depth |
Plate thickness |
Ultimate tensile strength |
Average tensile strength |
Fatigue |
|
|
p |
d1 max |
b1 min |
Ld2 max |
max |
Lc max |
h2 max |
T1 |
Q min |
Q0 |
amx |
|
|
mm |
mm |
mm |
mm |
mm |
mm |
mm |
mm |
kn |
kn |
kgf |
|
|
06B |
9.525 |
6.35 |
5.72 |
3.28 |
13.2 |
14.2 |
8.2 |
1.3 |
9 |
10 |
|
|
415 |
12.7 |
7.75 |
4.88 |
3.96 |
12.5 |
13.9 |
10.4 |
1.3 |
11.6 |
12.5 |
380 |
|
415H |
12.7 |
7.75 |
4.88 |
3.96 |
13.1 |
14.5 |
11.5 |
1.5 |
15.6 |
16.1 |
380 |
|
420 |
12.7 |
7.77 |
6.35 |
3.96 |
14.5 |
16.1 |
12 |
1.5 |
16 |
16.5 |
380 |
|
420H |
12.7 |
7.77 |
6.35 |
3.96 |
15.7 |
17.4 |
12 |
1.8 |
17 |
17.5 |
380 |
|
428 |
12.7 |
8.51 |
7.75 |
4.45 |
16.5 |
18.05 |
12 |
1.6 |
17.8 |
18.5 |
380 |
|
428H |
12.7 |
8.51 |
7.75 |
4.45 |
18.3 |
19.08 |
12 |
2.03 |
20.6 |
21.1 |
450 |
|
428HG |
12.7 |
8.51 |
7.75 |
4.51 |
18.9 |
20.1 |
12.3 |
2 |
20.6 |
21.5 |
450 |
|
520 |
15.875 |
10.16 |
6.35 |
5.08 |
17.7 |
19 |
15 |
2 |
26.5 |
29.5 |
650 |
|
520H |
15.875 |
10.16 |
6.35 |
5.24 |
18.9 |
20.5 |
15 |
2.42 |
30 |
31 |
700 |
|
525 |
15.875 |
10.16 |
7.94 |
5.08 |
18.8 |
20.5 |
15 |
2.03 |
26.6 |
29 |
650 |
|
525H |
15.875 |
10.16 |
7.74 |
5.24 |
20.4 |
22.2 |
15 |
2.42 |
30 |
31 |
700 |
|
530 |
15.875 |
10.16 |
9.4 |
5.08 |
20.9 |
22.2 |
15 |
2 |
26.5 |
29.7 |
650 |
|
530H |
15.875 |
10.16 |
9.4 |
5.08 |
21.9 |
24.2 |
15 |
2.42 |
30 |
31.5 |
700 |
|
630 |
19.05 |
11.91 |
9.4 |
5.94 |
22.2 |
24 |
18 |
2.4 |
35 |
37 |
800 |
HangZhou CZPT Industry Co., Ltd. is a specialized supplier of a full range of chains, sprockets, gears, gear racks, v belt pulley, timing pulley, V-belts, couplings, machined parts and so on.
Due to our CZPT in offering best service to our clients, understanding of your needs and overriding sense of responsibility toward filling ordering requirements, we have obtained the trust of buyers worldwide. Having accumulated precious experience in cooperating with foreign customers, our products are selling well in the American, European, South American and Asian markets.Our products are manufactured by modern computerized machinery and equipment. Meanwhile, our products are manufactured according to high quality standards, and complying with the international advanced standard criteria.
With many years’ experience in this line, we will be trusted by our advantages in competitive price, one-time delivery, prompt response, on-hand engineering support and good after-sales services.
Additionally, all our production procedures are in compliance with ISO9001 standards. We also can design and make non-standard products to meet customers’ special requirements. Quality and credit are the bases that make a corporation alive. We will provide best services and high quality products with all sincerity. If you need any information or samples, please contact us and you will have our soon reply.
| Surface: | Golden, Black, Blue, Grey |
|---|---|
| Surface Treatment: | Zinc Plated, Sand Blasting, Dull Polish |
| Process: | Assemble |
| Structure (for Chain): | Motorcycle Chain |
| Certification: | ISO9001：2001 |
| Number of Row: | Single Row |
| Customization: |
Available
| Customized Request |
|---|
What are the advantages of using a lightweight drive chain?
Using a lightweight drive chain offers several advantages in certain applications where weight reduction is a critical factor. Here is a detailed explanation:
Lightweight drive chains are specifically designed to provide reliable power transmission while minimizing the overall weight of the system. The advantages of using such chains include:
- Improved Energy Efficiency: Lightweight drive chains reduce the overall mass and inertia of the power transmission system. This results in improved energy efficiency, as less power is required to accelerate and decelerate the lighter components. Reduced energy consumption contributes to cost savings and promotes sustainability.
- Enhanced System Performance: By reducing the weight of the drive chain, the overall system performance can be improved. The reduced mass allows for quicker response times, faster acceleration, and improved dynamic performance of the machinery or equipment. This can be particularly beneficial in applications that require rapid changes in speed or direction.
- Increased Speed Capability: Lightweight drive chains enable higher speeds due to reduced inertia and decreased centrifugal forces. This allows for faster operation, quicker cycle times, and improved productivity in applications that demand high-speed power transmission.
- Reduced Wear and Friction: The lighter weight of the drive chain can contribute to reduced wear and friction between the chain and the sprockets. With less weight bearing on the chain and sprocket teeth, there is reduced contact stress and improved lubrication distribution. This leads to lower frictional losses, decreased wear, and extended chain life.
- Easier Installation and Maintenance: Lightweight drive chains are easier to handle and install compared to heavier chains, reducing the physical strain on operators during installation or maintenance tasks. The reduced weight simplifies handling and improves overall ergonomics, making it more convenient for operators to work with the chain.
- Application Versatility: Lightweight drive chains can be used in a wide range of industries and applications where weight reduction is advantageous. They are commonly employed in sectors such as automotive, robotics, aerospace, and portable equipment, where lightweight components contribute to improved performance and fuel efficiency.
It is important to consider the specific requirements and constraints of the application when selecting a lightweight drive chain. Factors such as load capacity, speed capabilities, environmental conditions, and material selection should be taken into account.
While lightweight drive chains offer numerous benefits, it is crucial to ensure that their reduced weight does not compromise their load-carrying capacity or durability. Regular maintenance, including proper tensioning, lubrication, and periodic inspection, is essential to maintain the optimal performance and reliability of lightweight drive chains.
By utilizing lightweight drive chains in appropriate applications, operators can benefit from improved energy efficiency, enhanced system performance, increased speed capabilities, reduced wear and friction, easier installation and maintenance, and overall weight reduction, contributing to improved efficiency and performance of the power transmission system.
Can a drive chain be used in a printing or paper industry application?
Yes, a drive chain can be used in various applications within the printing and paper industry. Here is a detailed explanation:
The printing and paper industry requires reliable and precise power transmission solutions to operate machinery for tasks such as printing, cutting, folding, and conveying. Drive chains offer several advantages in these applications:
- Precision and Accuracy: Drive chains provide accurate and repeatable power transmission, ensuring precise movement and control required in printing and paper industry applications.
- High Load Capacity: Drive chains have high load-carrying capacity, making them suitable for conveying heavy rolls of paper, moving printing plates, or driving cutting and folding mechanisms.
- Compact Design: Drive chains have a compact design, allowing them to fit in tight spaces and transmit power efficiently in confined areas commonly found in printing and paper machinery.
- Reliability and Durability: Drive chains are known for their reliability and durability. They can withstand continuous operation, shock loads, and varying environmental conditions typically encountered in the printing and paper industry.
- Customization and Adaptability: Drive chains offer flexibility and customization options to meet the specific needs of different printing and paper applications. They can be tailored in terms of size, pitch, attachments, and materials to accommodate various requirements.
- Compatibility with Ancillary Devices: Drive chains can be easily integrated with other components commonly used in the printing and paper industry, such as tensioners, guides, sprockets, and bearings, to ensure optimal performance and reliability.
It is important to select the appropriate drive chain type, size, and material based on the specific requirements of the printing and paper application. Additionally, regular maintenance, including inspection, lubrication, and tension adjustment, is crucial to ensure optimal performance and longevity of the drive chain in these applications.
By leveraging the advantages of drive chains, the printing and paper industry can achieve efficient and reliable power transmission, enabling smooth operation and high-quality production.
editor by CX 2023-08-14